Riding Mowers

Riders/Garden Tractors – Complete General Maintenance Service ($130.00 + PARTS):

  1. Remove debris from the engine cooling fins
  2. Clean or replace the air filter
  3. Replace the spark plug(s)
  4. Inspect or replace the fuel lines
  5. Replace the fuel filter
  6. Drain and flush carburetor fuel bowl
  7. Flush fuel lines and tank if needed
  8. Adjust throttle & choke cables if needed
  9. Replace engine oil
  10. Replace engine oil filter if applicable
  11. Remove debris from deck components
  12. Inspect or replace deck belt
  13. Inspect or replace PTO belt
  14. Inspect or replace tension idler pulleys
  15. Sharpen & balance the cutting blade(s)
  16. Adjust deck height to cut level
  17. Remove debris from steering components
  18. Remove debris from transmission area
  19. Lube cables, steering, and blade spindles
  20. Inspect & charge the battery
  21. Check & fill tires to proper inflation
  22. Install tire plug or inner tube if needed
  23. Degrease the engine if needed
  24. Wash the mower
  25. Test the overall operation & performance

 

NOTE: Rebuilding or replacing the carburetor and replacing the drive belts are NOT included
in this service and are billed at the regular shop labor rate + parts.

 

Zero Turn Mowers – Complete General Maintenance Service ($150.00 + PARTS):

  1. Remove debris from the engine cooling fins
  2. Clean or replace the air filter
  3. Replace the spark plug(s)
  4. Inspect or replace the fuel lines
  5. Replace the fuel filter
  6. Drain and flush carburetor fuel bowl
  7. Flush fuel lines and tank if needed
  8. Adjust throttle & choke cables if needed
  9. Replace engine oil
  10. Replace engine oil filter if applicable
  11. Remove debris from deck components
  12. Inspect or replace deck belt
  13. Inspect or replace PTO belt
  14. Inspect or replace tension idler pulleys
  15. Sharpen & balance the cutting blade(s)
  16. Adjust deck height to cut level
  17. Remove debris from steering components
  18. Remove debris from hydro units
  19. Inspect hydro fluid levels
  20. Replace hydro filter if applicable
  21. Adjust hydro steering tracking
  22. Lube cables, steering, and blade spindles
  23. Inspect & charge the battery
  24. Check & fill tires to proper inflation
  25. Install tire plug or inner tube if needed
  26. Degrease the engine if needed
  27. Wash the mower
  28. Test the overall operation & performance

 

NOTE: Rebuilding or replacing the carburetor and replacing the drive belts are NOT included
in this service and are billed at the regular shop labor rate + parts.

 

 

ALL OTHER SERVICES:

  • SHOP LABOR RATE – $65.00 per hour
  • ONSITE LABOR RATE – Service Call + Travel Charge + Additional Labor (If applicable)
    Service Call Fee – $100.00 (First 30 minutes)
    Additional Labor – $25.00 (for every 15 minute after first 30)
    Travel Charge Fee – $12.50 – $60.00 (Depends on Address/Mileage)

If you would like to schedule your equipment to be picked up for service,
please click on this link SCHEDULE A PICK-UP FORM or call (904) 292-9083.